are feeling great. However, when you get out of the tub, you end up struggling to replace its heavy, hot tub cover. Investing in a hot tub cover lifter is the solution.

In this article, we will discuss some of the best hot tub cover lifters available.

Best Hot Tub Cover Lifter Reviews

Blue Wave Low Mount Spa Cover Lift

Blue Wave NP5022 Low Mount Spa Cover Lift,Brown
  • Makes lifting your spa cover easy
  • Constructed of high quality powder-coated steel
  • Fits most square & rectangular spas up to 8 ft wide with radius corners
  • Won't rust or corrode over time
  • Backed by a 1-year warranty

This model – Blue Wave Spa Cover Lift makes lifting your hot tub cover a breeze. This low-mount cover lift fits most rectangular and square hot tubs up to eight feet wide with radius corners. It won’t corrode or rust over time, due to its high quality powder-coated steel construction. It comes with a one-year warranty.

Consumers reported that this model is both sturdy and functional. They said it is very easy to attach and lifts your hot tub cover with ease. Reviewers appreciated how well packaged it was to prevent any damage during shipment. They noted that only a few tools, some wrenches and a drill, were needed for installation. Long-term users said they would definitely buy it again. They deemed it a good value for the money.

Buy on Amazon

The Cover Rock-It

This hot tub cover lifter – The Cover Rock-It fits most hot tubs up to 96″. Its powder coated and zinc plated finish resists rust and corrosion. It requires as little 18″ of clearance, and it is constructed with under-spa plates that are held firmly in place by the weight of the tub. The plates are 8.75″ by 8.75″ in size. The cover stores conveniently on the side of the hot tub to provide a full view while folded down.

Users appreciated the quick and simple installation, saying it was done in just 20 minutes. They stated it was very easy to use, and they liked that it keeps the hot tub cover off of the ground when the tub is in use. Customers noted that the tubing at the bottom that supports its weight is made out of thick, sturdy material. They reported it was super light with great craftsmanship. Reviewers said they were able to install it without draining the tub as long as it was sitting on a hard surface. They deemed it a good value for the money.

ABC Spa Cover Roller

ABC Spa Cover Roller
  • Easy To Use & Install - Completely Assembled - Only Needs A Screwdriver To Mount To Spa
  • 4 Rollers On Each Arm Make It A "Snap" To Slide On & Off - Cover Maybe Used As A Table Top While In Open Position
  • Requires 1/2 Width Of Spa Cover Behind Spa - Fits Square & Rectangle Spas
  • Folds Snug Against Spa While Not In Use - Manufactured Using The Most Durable Weatherproof Materials

The ABC Spa Cover Roller is a unique hot tub cover lifter, because only half of the hot tub cover is behind the hot tub. This design allows you to use your hot tub cover as a table top when it is resting on the lifter arms. Rollers on each side make it easy to put the hot tub cover on and take it off. When the roller is not in use, the arms fold up securely against your hot tub. It also comes completely assembled, so all you need is a screwdriver to mount it on the hot tub. It fits both rectangular and square hot tubs, and it is made with durable, weatherproof materials.

Reviewers deemed this model “unbreakable’, because you just slide the hot tub cover over on the two arms, which puts less strain on the lid. They appreciated the quick and easy installation process. Users also stated nearly anyone can open and close the hot tub without any assistance. They loved the ability to use the hot tub cover as a table for their drinks, towels, or cell phones. Customers were amazed at how well it functions after years of usage. They deemed it an excellent value for the money.

Buy on Amazon

Cover Valet NP509 Spa Cover Lift and Caddy

This model – Cover Valet Spa Cover Lift and Caddy has a new under mount cabinet design that enables it to work well with all hot tubs. It also has gas springs for quick and easy hot tub cover removal. Your hot tub cover fits to the side of your hot tub, and it is also adjustable; it raises or lowers the hot tub cover when it is stored. It takes mere minutes to install, and it is made of high-grade powder coated aluminum to prevent rust or corrosion. Extra large spacers are included for hot tub covers with 4″ to 6″ spacers. It also comes with a generous five year warranty.

Customers reported that they chose this model, because it doesn’t require you to drill into the hot tub cabinet. Those with chronic pain stated that they are able to remove the hot tub cover by themselves with little effort. Reviewers who have used this model for several years noted that it continues to work flawlessly. They liked that it keeps the hot tub cover off of the ground and that it doesn’t put any stress on the middle seam. Users said that the hydraulics work great. They loved the fact that you can turn the cradle flat.

Smart Spa CoverClassic Classic Hot Tub Cover Lifter

Smart Spa CoverClassic Classic Hot Tub Cover Lifter, One Size, Black
  • Does not work with sunken or inground spas. Powder Coated Aluminum - Requires 18" of Clearance Behind Spa
  • Easy to Install & Use - No Cover Handling - No Gas Shocks
  • Lifts & Stores Cover Behind Spa - Fold Back, Lift Up, Store Cover
  • Fits Square or Rectangle Hot Tubs up to 96" - Low Profile Design Blends Easily
  • Reduces Wear & Tear on Cover- Cover Lasts Longer

This hot tub cover lifter – Smart Spa Bottom Mount Cover Lifter fits rectangular and square hot tubs up to 96″. It is easy to install and use, and there is no cover lifting or gas shocks. You can store it easily behind the hot tub by folding it back and lifting it up. Your hot tub cover will last longer with this model, because it reduces wear and tear. It is constructed of powder-coated aluminum to prevent corrosion or rust from forming. It requires just 18″ of clearance behind the spa and only 3″ along the sides, so it is great for smaller spaces.

Consumers appreciated the quick and easy assembly. They noted that the parts are clean and well-made, and that the fasteners are made from stainless steel. Users loved the fact that it can be mounted to a deck. They also liked the pre-installed foam tubing to cushion the contact between the lifter bar and the hot tub cover. Reviewers reported that it opens and closes with very little effort. They deemed it an excellent value for the money.

Buy on Amazon

If you are looking to make your life a little easier and preserve the therapeutic benefits received from soaking in a hot tub, any one of these lifters will do nicely.